What is a Tyre?
- Pneumatic tyre is a flexible, toroidal, compressed gas (normally air) container mechanically attached to the outer circumference of rim of a vehicle wheel. The name is derived from “Attire” – a protecting covering or coat.
- The rubber exterior of a pneumatic tyre is merely a flesh for a skeleton of fabric; this skeleton and the manner in which it is constructed are of fundamental importance in establishing the tyre’s characteristics.
- A tyre is an integral component of a vehicle and is the intermediary between the vehicle and the road.
Why do I need Tyre?
- Supporting the vehicle weight including payload (load carrying capacity)
- Transferring Traction and Braking forces to the road surface (Traction, Torque and braking)
- Absorbing Rod shocks (Cushioning and Enveloping)
- Changing and maintaining Direction of travel (Steering response and stability during cornering)
- Low Rolling Resistance
- Minimum Noise / Road Vibration
- High Speed safe operation Capability
- Aesthetics & Comfort
- The components of different Types of Tyre are shown below:
Truck Bias Tyre
Radial (PCR) Tyre
- Tread: The portion of the tyre, which comes in contact with the road, is called the tread. It is designed to provide the necessary traction, wear resistance, and allow for low heat build up and low noise.
- Side Walls: These are the layers of appropriate thickness of rubber compound applied on both sides of the tyre carcass between the beads and tread.
- Plies: Plies atr reinforcing members of the tyre, which are made from rubber coated fabric (Rayon, Nylon, Steel, Polyester etc.
For bias tyres Nylon is the most commonly used fabric whereas Polyester is used for Passenger radial and steel for truck radials.
- Bead: Layers of rubber coated high tensile steel wires formed into inextensible loops.
How to Read a Tyre
- There are 3 types of tyre designations, which are used :
|10.00-20 16 PR JET TRAK||185/65R14 VECTRA 82 T||F78- 15 8PR JETRIB|
|10.00R20 16PR JS JDH 146/142 K||215 R14 C 10PR STEELKING|
|11R22.5 16 PR JW JUH||295/80R22.5 16PR JS JUH|
Understanding Tyre Designation
Truck Bias Tyre
Truck Radial Tyre
Truck Radial Tubeless Tyre
Car Radial Tyre
Correlation between Speed symbol and maximum speed
The table explains the relationship between the speed symbol shown on the tyre and the maximum speed, which is possible with the particular tyre.
Correlation Load index and tyre load capacity
The table explains the relation between the load Index shown on the tyre and actual load taking capacity.
Carcass ply cords run at 90 degrees to circumferential axis. Carcass stabilized by steel belts.
Carcass ply cords run Carcass ply cords run at at an angle with respect to 90 degrees to circumferential axis of the circumferential axis.
Advantage of Radial tyre :
- Longer tyre life resulting from lesser tread squirming & shuffling.
- Improved fuel efficiency due to Reduced rolling resistance .
- Better high speed performance: Better dimensional & directional stability due to reduced edgewise bending.
- Better Vehicle handling due to:
- Minimum distortion in foot print area
- Higher flexibility of sidewalls
- Reduced side slip
- Greater traction , improved braking & cornering stability due to:
- Larger footprint
- More Uniform Pressure Distribution
What is a tubeless Tyre
- Tubeless tyres, as the name suggests, are tyres without the tube. The tyre is built in such a way that it can contain the air by itself. It does not require a tube within it.
- The tyre and rim assembly form an air container, to “Seal” and “Contain” the compressed air inside the assembly.
- The tyre has a halo- or chloro-butyl lining on its inside which is airtight. Together with the airtight joint between the tyre and the wheel, the membrane forms a container that holds the air for the tyre.
- A valve is fitted on to the rim for inflation or deflation to the assembly.
Advantages of Tubeless Tyres Use
- Since tube is eliminated , friction between tyre & tube is not experienced, thus lower rolling resistance, improved fuel efficiency, less vibrations, less heat generation and better comfort.
- Chances of tube getting pinched under the bead while mounting are eliminated.
- The number of components used in a tyre wheel assembly gets reduced :
- The tube and the flap are both eliminated
- Lower tyre/wheel weight (un-sprung mass) results in better vehicle handling and therefore longer life.
- In case a nail or other sharp object penetrate a tubeless tyre, the air loss is not sudden. The tyre wheel assembly continues to perform its function for some time before going flat. This ensures and is one of the biggest advantages of a tubeless tyre.
- If there is a sharp penetration in a tube tyre, the air in the tube starts leaking suddenly and rapidly in all directions. This causes the wheel assembly to loose stability thereby resulting in accidents.
- Since there is no tube in tubeless tyre the probable and associated potential problems such as “Defective Splice”,“Defective Valve Base”, “Thin Gauge”, “Foreign matter” or “Pin Hole” are eliminated, ensuring safety of the wheel assembly.
- Tubeless tyre beads are designed to seat on the rim bead seat area with higher “interference” (tight fit) as compared to a tube type tyre. In the event of air loss the chances of bead unseating from the rim is less, therefore providing higher safety.